Processing of Dolomite Crusher Mining Australia
XSM is one of China's largest crusher and milling machine manufacturers, has the most advanced crushing and milling machine manufacturing technology. People around the world to provide the best crusher has been xuanshi long goal.
introduction of dolomite
The dolomite includes a pronounced fractured internal structurein in depth components of your quarry. That is definitely to say, you will discover visibly discernable fissure systems operating along 3 planes,positioned vertically above 1 yet another and spaced less than two cm apart. The degree of cementation around the fissure surfaces varies. Karstic sections may be identified in areas.These show signs of leaching and include sprinklings of foreign material.
two models of crushed dolomite mining
The comparative analysis was performed for two models of crushed dolomite mining for concrete aggregates. The technological method of mining was deemed following the removal with the overburden, and drilling and blasting mineral raw material. The models imply:
(1)the model of quarrying with stationary processing
1.loading of your mined rock mass into dumper,
two.transport for the stationary plant outside with the mining field,
3.processing on the stationary plant,
(2)the model of quarrying with mobile processing
1.loading of mined rock mass in to the mobile plants,
two.crushing and screening on mobile plants,
3.loading and transport in the fraction-4 mm to the stationary plant,
four.refining the fraction-4 mm by a wet approach.
the technique of mining for dolomite
The technique of Mining for dolomite will be mechanized by deployment of Hydraulic Shovels in combination with tippers of 10tons capacity. As the stratum encountered is just not incredibly difficult, there is going to be minimum drilling & blasting requirement.The technique of Mining for dolomitic limestone is going to be mechanized method by deployment of Hydraulic Shovels in combination with tippers of 8tons capacity. Drilling & blasting requirement will be moderate as for the stratum encountered in the mining lease area. Sufficient number of bunds and also parapet walls is going to be made all along the mine haulage roads wherever necessary in order to maintain safe working conditions The stripping ratio is 1:0.71 and the proposed working depth in the mine is 765m RL at the end of 5th year from the plan period.